SLP Stage 1 / Stock 3-12K' Clutch Kit 2017-19 Ski-Doo 850 Summit 41-411

Description

Get your horsepower to the ground with SLP Power Shift Clutch Kits™! Countless hours of field testing go into each kit to ensure maximum horsepower transfer efficiency.
This kit is designed for
2017-19 Ski-Doo Summit, FreeRide, and Renegade Backcountry models
at 3-12,000' in elevation for Stock or SLP Stage 1 setup
.
SLP Stage 1 includes SLP Lightweight Silencer
(Running RPM with this setup is 7800-8000)
It
includes the following components
to make your sled perform at its peak
:
SLP Primary Spring (Yellow/Purple/Blue #40-233)
SLP Magnum Force
™
Weights (#40-155)
SLP Detailed Setup
Instructions
SLP Clutch Kits include only the parts you need for maximum performance. In some cases OEM parts are retained if they are the best choice. If your sled is used in extreme conditions, modified other than as specified, rider weight exceeds 220 lbs., or with a heavily studded track, a custom combination may apply. SLP technical service representatives can provide advice for these special applications.
Benefits of the SLP Power Shift
™
Clutch Kit with Magnum Force
™ weights on 20
17-19 Summit, FreeRide and Renegade Backcountry
models:
Unique weight profile increases shift force for better belt pinch
Significantly increases acceleration
Lower clutch running temperatures
Increased belt life
Responsive backshift
More consistency over a broad range of elevations and conditions
Adjust the Magnum Force™ weights to fine tune your sled for elevation, conditions, longer track, deeper lug track, or added horsepower
without
having to remove the weights from the primary clutch.
Some specialized tools are highly recommended for the installation of this SLP clutch kit:
Primary Clutch Holding Tool #20-309, ebay item #263995054718
(holds P-Drive primary clutch from turning while removing or installing the clutch on the tapered shaft)
Primary Clutch Puller #20-228 ebay item #262770858427
(removes the P-Drive primary clutch from the tapered crankshaft, also separates movable sheave/spider assembly from stationary sheave)
Clutch Press Tool #20-233 ebay item #263991668916
(compresses P-Drive primary clutch for ease of dis-assembly and re-assembly when under spring tension)
Weight/Roller Pin Tool #20-235 ebay item #263959834885
(allows removal of tapered weight/roller pins from P-Drive clutch)
Please inquire for more information.
Limited Warranty
Starting Line Products, Inc. warrants each product it manufacturers to be free from defect in material and workmanship for the purpose it was intended. Starting Line Products, Inc. shall not be liable for damage or delays caused by defective material or workmanship; it is limited to the repair or replacement, at its factory, of any defective article or part thereof, which may be returned to the factory; transportation charges prepaid, within 60 days after shipping date to original purchaser. Starting Line Products, Inc. shall be the sole judge of the existence of any defect in the article returned. No claim for charges incurred in the removal, disassembly, or reinstallation of such article will be allowed. This warranty shall not cover any article which has been misused or neglected or damaged by accident; any article which has been altered outside the Starting Line Factory, or the performance of any engine or equipment on or in which any article of the company’s manufacturer is used. Starting Line Products, Inc. shall, in no event, be liable for consequential damage or contingent liability arising out of any total or partial failure to function of any article manufactured by, if, or of any engine or equipment on or in which it is used. Failure of a user to give notice of claim as to defect claimed under the provisions of this warranty within sixty (60) days of the appearance of such claim shall constitute a waiver by customer of all claims with respect to such goods and equipment. No expressed, implied, or statutory warranty other than that herein set forth is made or authorized to be made by the company.
Note: All orders of 0 or more will require a signature for delivery.