SWAGELOK MS-TBE-1 115 Electric 2 inch TUBE BENDER

Description

Swagelok
2 inch tube bender in Very nice shape and ready to put to use. We have a video for this machine coming soon as well.
Tube Benders
Swagelok® benders provide high-quality bends on fractional and metric tubing
made from materials that can be used with Swagelok tube fittings. These easy-to-
use tube benders reduce installation time and effort as well as the potential for
wrinkling or other damage to the tubing during bending.
Contents:
Tube Benders
Features
■ Electronic control
■ 1 to 110° bending range
■ 1 to 2 in. outside diameter (0.049
to 0.220 in. wall thickness) and 25
to 50 mm outside diameter (1.2 to
5.0 mm wall thickness) tubing range
■ One bend shoe for 1, 1 1/4, 1 1/2, and
2 in. sizes
Technical Data
■ Dimensions—vertical position:
44 in. (112 cm) high, 29 in. (74 cm)
wide, 30 in. (76 cm) deep
■ Weight—420 lb (191 kg)
■ Power requirements
MS-TBE-1—115 V (ac), 50/60 Hz;
maximum current—13 A
MS-TBE-2—230 V (ac), 50/60 Hz;
maximum current—7 A
See Ordering Information, page 4.
See the Swagelok Electric Tube
Bender User’s Manual, MS‑13‑138,
for complete setup and operating
instructions.
Electric Tube Benders
Tubing Data
Minimum tube length, bend radius, and wall thickness limits required to make a 90°
bend in annealed tubing are listed below. Some applications require specific bend radii;
consult applicable codes for bend radius requirements. See Swagelok Tubing Data
(MS‑01‑107) for suggested tubing wall thickness for use with Swagelok tube fittings.
Thank you for Your Business!
God Bless!