"*NEW DESIGN* RTS-500 Cutter Adapter for Festool Domino DF 700 "

Description

RTS-500 Cutter Adapter for Festool Domino DF 700
**2021-05-22:  Update:  RTS-500 Cutter Adapters are back in stock and shipping within 1-2 business days!
The RTS-500 Cutter Adapter is a precision-machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700.  This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter.
The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500.   This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth.
Because of the lower fence travel limit of the Domino XL, the RTS-500 Cutter Adapter works best with one of our Domi-shims, which will allow centering on small stock such as 1/2" or 12mm plywood.   We recommend our
Imperial Thickness Gauge + Domi-shim set
for working with imperial size stock,  or our
10mm Metric Domi-shim
for working with metric stock.
Manuals and other videos can be found at the
support
page.
*Cutters, wrenches, and Domino XL shown in photos not included.